Coastal Climate Control is...

Bloggin' It!

Capilliary Tube (Cap Tube) Issues

Cap tube location moisture issueCap tube location blockage issueAll compression refrigeration systems depend on some device to separate the high and low pressure sides of the system. In a capillary (cap) tube system, this is the capilliary tube itself, which, as the name implies, has an extremely small micro-bore at its center that is less than the diameter of a needle.

There are two main issues that can occur with cap tubes: a particle blockage at the high pressure end near the compressor (picture on the left), and a moisture, wax, or oil problem at the other next to the evaporator (picture on the right). The Guide below describes the symptoms and recommended remedies for cap tube problems.

Capillary Tube Troubleshooting Guide

By accepting you will be accessing a service provided by a third-party external to https://coastalclimatecontrol.com/

Contact Info

Phone: (301) 352-5738
Email: info@CoastalClimateControl.com
Office | Warehouse:
4831 Tesla Dr., Suite H
Bowie, Maryland 20715
Request Information
Click here for directions.

SPECIALOFFERS2

Coastal Climate Control
Cooling, Monitoring & Solar Solutions

Subscribe

Office | Warehouse:
Coastal Climate Control
4831 Tesla Drive
Suite H
Bowie, Maryland 20715
Phone: (301) 352-5738

Request Information
Click here for directions.