Rigid twinwall polycarbonate panel, 25.825" x 21.625" x .25" for the Solbian SP 50watt square solar panel.

This backing plate allows for air circulation under the solar panel, which helps keep the panel's overall temperature down. The hotter the solar cells get, the lower the voltage, which lowers the panel's output.

If you are installing your solar panels on a bimini or dodger, and the only way you can do this is by going across a framing bar instead of between them, then a rigid backing panel or other such device is essential to prevent the solar cells resting on the frame from breaking due to the natural movement inherent in canvas covers.

Each backing panel comes with U-channel edging for the two long sides. Grommets can be easily installed on the ends. The U-channels and provided tape hold the solar panel to the backing panel.

The ends where the grommets can be installed can be cut off if securing rigid panel to a hard surface.

Write a review

Please login or register to review

Rigid Backing for special installations of Solbian SP 50watt solar panels, square

  • Product Code: C5030
  • Availability: In Stock
  • $47.00

Related Products

Solbian SP 50watt solar panel, square

Solbian SP 50watt solar panel, square

23.4" x 21.2" x .08" with SunPower Monocrystalline silicon solar cells..


© 2017 Coastal Climate Control - All Rights Reserved | ADMIN